PAN Industries Desander is a hydroclone that is used to remove sand and silt from drilling fluids in an Oil Field drilling rig. Hydroclones operate on the basis of centrifugal force such that the mud with smaller particles is returned to the active system while the larger particles are discarded. PAN Ind. Desander removes those abrasive solids from the drilling…
PAN Industries Desilter is a Hydroclone that is used to remove sand particles which have a grain size of 20 microns or less. Hydroclones operate on the basis of centrifugal force such that the mud with smaller particles is returned to the active system while the larger particles are discarded. The usual size of a Desilter is 6 inches and…
Drifts are used for testing roundness of Casing & Tubing; making certain there are no Kinks, bends or flat places in the pipe. Drifts are used to ensure that the Drill pipes are of proper diameter throughout to run downhole tools. PAN can manufacture drifts as per customer specifications when requested.
Oilfield Drill Collar Slips Pan Models : PAN-DCS-S, PAN-DCS-R & PAN-DCS-L PAN Industries manufactures Drill Collar Slips in three sizes Short, Regular & Long covering all popular Drill Collar sizes in use i.e. from 3” to 14” O.D. Drill Collar Slips, Provided with elastromer grips on handles. PAN Drill Collar Slips are having multi segment design to give a full…
PAN Industries manufactured “Drill Pipe/Drill Collar Spinner” is the best replacement of the spinning rope (or chain). It is applied for the mechanized spinning operation. The applicable range of pipe diameter is wide, and it can be quickly & arbitrarily adjusted whenever necessary by changing the rollers. There are two configurations for clamping apparatus: air tyre and air cylinder. It…
Drill Pipe Power Tong is used for quick and safe making up and breaking out of drill pipes and drill collars hence they reduces the drill time and lowers the cost. PAN Drill Pipe Tongs are designed and manufactured in according with standard.
A drill pipe wiper is normally placed around the outside of drill pipe or tubing oil drilling rigs, HDD rigs and service rigs. The primary purpose of pipe wipers in drilling operations to clean and remove excess drilling mud or debris from the outer surface of the drill pipe. It is an essential tool for maintaining the cleanliness and integrity…
PAN Industries manufactured “EZY Torque Hydraulic Cat Head” is specially designed to provide an accurate, smooth, constantly increasing make-up and break out joint at rotary table, in a torque range of 40,000 to 1,50,000 ft-lbs.
