PAN Industries offers wide range of cable protection solutions to reduce cable risks and prevent expensive workovers. Downhole Electrical cables are vulnerable to frequent failure due to their natural limits of breaking strain or poor operational factors. Also the highly deviated wells may also increase the cable tensions. Our cable protectors are available in both standard and customized systems.
Lifting bails are commonly used to lift tool joint, drill pipe, stabilizers, drill collars, subs, drill bits and other oilfield and mining type API threads. Lifting bails is also known as Lifting Caps.
PAN Industries Offers both Clamp On Casing Thread Protector : Air Operated Clamp On Casing Thread Protector Manual Type Clamp On Casing Thread Protector
Drifts are used for testing roundness of Casing & Tubing; making certain there are no Kinks, bends or flat places in the pipe. Drifts are used to ensure that the Drill pipes are of proper diameter throughout to run downhole tools. PAN can manufacture drifts as per customer specifications when requested.
PAN Industries manufactured “Drill Pipe/Drill Collar Spinner” is the best replacement of the spinning rope (or chain). It is applied for the mechanized spinning operation. The applicable range of pipe diameter is wide, and it can be quickly & arbitrarily adjusted whenever necessary by changing the rollers. There are two configurations for clamping apparatus: air tyre and air cylinder. It…
PAN Industries Drill Pipe Protectors are made of Nitrile Rubber having hardness 70 ± 50 duro with spring Steel Insert and Tapered Lock Pin Design for high abrasion, wear and tear and oil resistance.
A drill pipe wiper is normally placed around the outside of drill pipe or tubing oil drilling rigs, HDD rigs and service rigs. The primary purpose of pipe wipers in drilling operations to clean and remove excess drilling mud or debris from the outer surface of the drill pipe. It is an essential tool for maintaining the cleanliness and integrity…
PAN Industries offers a complete range of hammer unions in standard and sour service. Hammer unions are commonly used in oilfield industry to seal two pieces of pipe or hose together and connected by threads or welds. They are high-pressure threaded or welded connections with two halves, a threaded female half and a wing male half with swivel nut that…
PAN Industries Hinged Casing Spider has a hinged spider body with a split insert bowl. It is put above rotary table, which can handle most casings of different sizes. These are manufactured as per API Spec 7K.
Enhance the longevity and efficiency of your drilling operations with our advanced wear guide plate assemblies at Pan Industries. Specifically designed to minimize wear on Master Bushings and Bowls, our assemblies are indispensable for top-drive drilling systems.
Lifter for Rotary Slip, Drill Collar Slip & Casing Slip PAN Industries manufactures Power Slip Lifter in different models, installed with Master Bushing or Casing Bushing that works as a lifter to hold drill pipe slips, drill collar slips or casing slips. Lifter pushes the slip up & down in the Rotary Table to hold and release slips from tubular.…
A top drive kelly bushing saver is a specialized tool used in drilling operations with a top drive system. The top drive is a drilling rig component that replaces the traditional rotary table, providing a more efficient and safer method of rotating the drill string during drilling operations. The kelly bushing is a key component in the top drive system,…
PAN Industries TS 100 Style Manual Spider comes in two ranges: 31/2" Bowl and 51/2" Bowl. The bowl sits differently in the API Bushing in table or can be bolted to adapter plate.
PAN Industries Type C/CHD Pneumatic spiders are utilized to handle drill pipe and tubing in oil well repairing. This type of spider can accommodate pipe from 1.315” to 5½”, the rated capacity of type C Spider is 80 tons, and the rated capacity of type CHD Spider is 120 tons. These are manufactured as per API Spec 7K.
PAN Industries Type E Pneumatic spiders are utilized to handle drill pipe and tubing in oil well repairing. This type of spider can accommodate pipe from 2-3/8” to 7- 5/8”, the rated capacity is 175 tons. These are manufactured as per API Spec 7K.
The QQP series pneumatic spiders are mainly applied to hold the drill pipes and tunings for their couplers fastening and removing during the oil well repairing operation. The cylinder, which is driven by the compressed air, activates the slip body lifting and lowering action, thus it largely reduced the workers working strength and increased the working effect. It is safe…
